Voltage-valet BH2 User Manual download pdf

ONE YEAR WARANTY

We guarantee each new Beverage Heater to be free

from defects in material or workmanship and to

perform under normal use and service. This

guarantee shall run for a period of one year from

the date of purchase, and obligations under this

guarantee are limited to remedying any defect or

replacing any defective part and shall be effective

only if the defective unit is returned to us within 12

months after purchase. Damage due to abuse, misuse,

or overloading is not covered by this guarantee. We

shall not be responsible for any other loss or damage

that may arise through the use by a purchaser or

others of this device, and the purchaser assumes such

responsibility and will hold Hybrinetics, Inc. harmless

in respect to all such loss or damage.

Important: Important: This is a factory direct warranty. Do not

return defectives to your retailer. All defectives must

be returned to the factory accompanied by a sales

receipt with the original date of purchase. For more

information please call our toll free number:

(800) 247-6900.

Voltage Valet Division, Hybrinetics, Inc.Voltage Valet Division, Hybrinetics, Inc.

225 Sutton Place, Santa Rosa, CA 95407

e-mail: hybrinet

@voltagevalet.com

www.voltagevalet.com

IMPORTANT SAFEGUARDS

When using electrical appliances, especially when children

are present, basic safety precautions should always be

followed including the following:

READ ALL INSTRUCTIONS BEFORE USEREAD ALL INSTRUCTIONS BEFORE USE

DANGERDANGER - The Beverage Heater’s heating element

becomes very HOT. Do not touch the hot element. Use

the handle.

To reduce the risk of death by electrical shock:

1. Always unplug the beverage heater

immediately after using.

2. Do not use while bathing.

3. Do not place or store this appliance where

it can fall or be pulled into a tub or sink.

4. Do not immerse the handle or cord into

water or other liquid at any time.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

HOUSEHOLD USE ONLY

WARNINGWARNING - To reduce the risk of burns, electrocution,

fire or injury to persons:

1. An appliance should never be left unattended when

plugged in.

2. Close supervision is necessary when this appliance is

used by, on, or near children or invalids.

3. Use this appliance only for its intended

use as described in this manual. Do not use

attachments not recommended by the manufacturer.

4. Never operate this appliance if it has a

damaged cord or plug, if it is not working properly,

if it has been dropped or damaged, or immersed in

water. Return the appliance to a service center for

examination and repair.

5. Keep the cord away from heated surfaces. Do not

allow cord to touch hot heating coil.

6. Do not let the cord hang over edge of table or

counter.

7. Never use while sleeping.

8. Do not use outdoors.

9. Do not place appliance on any surface while it is

operating.

10. Do not place appliance on or near a hot gas or

electric burner, or in a heated oven.

11. Extreme caution must be used when moving a

vessel containing hot oil or other hot liquids.

12. This appliance was set at the factory to operate at

120 or 240 volts.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

WARNING:WARNING: Do not plug beverage heater into electrical

outlet unless heating coil is immersed in liquid. Unplug

beverage heater from electrical outlet before removing

heating coil from liquid.

NOTE:NOTE: The Beverage Heater includes a burn shield that

will protect countertops if heating coil is hot when

placed on a counter surface.The beverage heater may be

operated with the burn shield in place or removed.

See Fig. 1

1. Insert heating coil into liquid. The liquid level must

be above the round part of the heating coil and

below the black handle.

2. Do not immerse the handle or cord into the liquid

at any time.

3. Plug beverage heater into electrical outlet.

4. Allow liquid to heat. Heating time for one cup of

water on 110/120-volt electrical service is 12–15

minutes. On 220/240-volt electrical service, it is

3–5 minutes.

5. When liquid has reached desired temperature,

remove plug from electrical outlet before removing

heating coil from liquid.

6. To avoid burns, use extreme caution when removing

heating coil from hot liquid and when moving hot

liquids.

7. To prevent possible damage, do not wrap the

electrical cord around thebeverage heater. Fold

cord loosely on the side of the beverage heater

and store in pouch.

120-240 VOLT OPERATION120-240 VOLT OPERATION

1. This beverage heater can be operated safely on

110/120 volt North American electricity or on

220/240 volt foreign electricity.

2. Adaptor plugs needed for use in 220/240 volt

countries are not included. Ask your Voltage

Valet retailer for the correct plug for the

country you are visiting.

SPECIAL INSTRUCTIONSSPECIAL INSTRUCTIONS

A short power supply cord has been provided with

the beverage heater to reduce the hazards

resulting from becoming entangled in or tripping

over a longer cord. To avoid a circuit overload, do

not operate another high-wattage appliance at the

same time on the same circuit.

MAINTENANCEMAINTENANCE

The beverage heater may be cleaned when it has

been unplugged and has cooled, by wiping with

hot, soapy water, followed by rinsing. Do not

immerse handle in liquid when cleaning. No other

maintenance is required.

Beverage Heater

Burn Shield

FIG 1

Instruction Manual - Model BH2

50/60 Hz 120V 125W - 240V 500W

Read instructions before using this appliance

Beverage Heater

Dual Voltage

Beverage Heater 1

Summary of Contents

Page 1 - Beverage Heater

ONE YEAR WARANTYWe guarantee each new Beverage Heater to be free from defects in material or workmanship and to perform under normal use an

Comments to this Manuals

No comments

Voltage-valet BH2 User Manual

Browse online or download User Manual for Radiators Voltage-valet BH2. Voltage Valet BH2 User Manual

Summary of Contents

Comments to this Manuals